|
[DPRG] Re: progress on Hough transform and small robot
Subject: [DPRG] Re: progress on Hough transform and small robot
From: Nathan Harlan
ntharlan at yahoo.com
Date: Wed Jan 31 15:14:29 CST 2007
On the R/C that I disassembled, the construction was similar to what you describe. My armature box contained a motor with a shaft encoder, the motor power was brown and red and the other colors were for the encoder. Hope that helps.
Nathan Harlan
1. Re: progress on Hough transform and small robot (Chris Jang)
----------------------------------------------------------------------
Message: 1
Date: Tue, 30 Jan 2007 06:12:38 -0600 (CST)
From: Chris Jang
Subject: Re: [DPRG] progress on Hough transform and small robot
ML, MR, and GND go straight to motor terminals. A, D, B, C go to a small
PCB which indicate armature position. I am afraid to take this little box
apart so I don't really know how it works inside.
---------------------------------
Cheap Talk? Check out Yahoo! Messenger's low PC-to-Phone call rates.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://list.dprg.org/pipermail/dprglist/attachments/20070131/42a05ea0/attachment.html
More information about the DPRG mailing list
|
